Aleck Plumbing
  • Home
  • Services
  • Schedule
  • Commercial Construction
  • Residential Remodel
  • About
    • Our Story
    • Reviews
    • Community
  • Contact
  • Blog

Hydro Jetting!

1/16/2020

 
What is Hydro Jetting?
Hydro jetting is the process of using a high-pressured flow of water to clean the interior surfaces of all drain lines, removing scale, grease, and other debris that has built up over time. This can be done on all types of drain lines ranging from 2” up to 12” pipe.
 
Why Hydro Jet?
Hydro jetting achieves a comprehensive cleaning of drain lines by clearing sludge or grease blockages quicker than it takes to rod these same lines. In hydro jetting, there is less of a chance of creating weak points in old piping from multiple visits, reducing further damage to drain lines.
 
Maintenance Jetting
Maintenance jetting can reduce blockages occurred during peak operating hours for commercial properties which can also reduce the need for emergency call outs.
 
Schedule a Jetting Today!
Simply call  us and we'll get you in touch with a jetting specialist to answer any questions you might have.
South Suburbs: 708-799-4670
Southwest Suburbs: 815-469-6080
West Suburbs: 630-369-0151
OR
Contact us online

be prepared during shower season!

6/12/2019

 
Picture
What a rain filled May we had. It is on record as the wettest May in history for Chicago! It’s not surprising, as May and June are traditionally Illinois’ wettest months of the year. Your sump pump probably did quite a bit of work in May so now would be a good time to check it as well as your battery back up pump, if you have one, to make sure they are in good shape to handle what may come throughout June. Let’s take a closer look at the important role the sump pump and battery backup serve and how to inspect the devices to make sure they work when it counts so you avoid costly flooding issues.
 
A sump pump protects the lowest part of your home, typically a basement, from being flooded. A sump pump is installed in a pit, and features sensors that can detect water from rain or snowmelt that enters the pit. When the water approaches floor level, it is pumped outside before it can flood the whole basement. A battery backup pump also sits in the pit, and is important because it kicks on when a power outage occurs that would put your regular sump pump out of commission.
Inspecting Your Sump Pump:
  1. Check the Discharge Line
    Check the discharge line for corrosion, clogs or leakage. If corrosion or leakage, it may need to be replaced. If clogged, remove blockage.
  2. Check the Inlet Screen
    The inlet screen is prone to clogging due to residue buildup and debris so check and remove any blockage.
  3. Check the Float Component of the Pump
    The float component of the pump should move smoothly to detect flooding and trigger the sump pump into eliminating water. Check the float and look for any blockages that could otherwise affect the component’s movement. Remove any unwanted debris if there is any.
  4. Keep the Pit Clean
    Scan the pit and remove any visible mud, stones, and other debris that could clog the pump.
  5. Test the Pump
    Pour a bucket of water into the pit. The float component should rise with the water level and trigger the unit to start pumping. If the sump pump does not start pumping right away, check the valve or the float switch for any damage. If these components appear to be damaged get them repaired right away.
  6. Check Pump Output
    If in testing, the unit is pumping water as soon as it is triggered by the float component, go outside to check that the water is being pumped away from your home.
  7. Clean the Pump
    Start by disconnecting the unit from the power source and removing the unit. Flush the pump with water to eliminate residue build up. After cleaning the pump, reinstall it back and reconnect the power source. Again, test the unit if it is working by pouring a bucket of water into the pit.
Picture
Inspecting Your Battery Backup Pump:
  1. Check the Battery Water Level
    Make sure the battery water level covers the cells.
  2. Keep the Pit Clean
    Inspect the backup pump set up in the pit for obstructions and debris just as you did for the primary pump.
  3. Test the Pump
    Unplug the primary pump and use a bucket to add water to the pit so that the backup runs. Once you confirm the backup is working properly remember to plug back in the primary pump.
 
We recommend checking your sump pump and battery backup twice a year. In doing so, you can rest a little easier when storm season hits knowing your pumps are good to go! For added piece of mind, you can also incorporate a wi-fi module into your sump pump system that sends emails or text notifications and status alerts to your phone, tablet or computer.
 
If you find that anything unusual or beyond your ability to properly handle when inspecting your pumps, the professionals at Aleck Plumbing would be happy answer your questions or step in and provide a helping hand.

Simply call  us
South Suburbs: 708-799-4670
Southwest Suburbs: 815-469-6080
West Suburbs: 630-369-0151
OR
Contact us online

What's Trending?

Picture
  • Touch/wave kitchen faucets – saves water and keeps your hands free
  • Bigger/taller kitchen faucets – makes a great impression
  • Large one bowl kitchen sinks that under mount or have an apron front – handles large pots and pans marvelously and look incredible
  • Polished chrome and nickel for bathroom faucets  – matching metals looks classy
  • Vessel-style bathroom sink bowl – adds style
  • Toilet seat warmers and automatic lid openers – convenience through technology
  • Open showers – increases the size of the bathroom

Thinking about a house make over? Consider incorporating some of these trends for striking looks, increased functionality and adding value to your home. Have questions? Feel free to give us a call and we’d be happy to provide our expert input.
Picture
The following is a general rule of thumb on when major plumbing fixtures will begin to be less efficient, cause problems and may need replacement.
Picture
TIP:
Start and keep a log of the age of your plumbing fixtures so you can make an educated decision on when the right time is to service an existing fixture and when it’s time to replace it.

    Picture

    AlEck plumbing

    Learn More
    Aleck Plumbing is a family owned plumbing company serving the west, south and southwest suburbs of Chicago for over 30 years. Plumbing is our passion. We care about every call we are asked to service and are committed to providing the best residential and commercial plumbing experience possible. We are top rated on Yelp, Google, Facebook, Angie’s List and the Better Business Bureau to prove it. Count on the Aleck Plumbing team of highly talented and knowledgeable plumbers to take the worries out of your plumbing projects and emergencies.

    Archives

    January 2020
    June 2019

    Categories

    All

    RSS Feed

Home            Services           Schedule

Residential Remodel
​

Commercial Construction
About Us
 • Our Story
 • Reviews
 • Community
Contact          Jobs          Offers


© 2019 Aleck Plumbing, Inc. All Rights Reserved.
All other trademarks and registered marks are the property of their respective owners.
Plumbing License #055-006027

Picture
  • Home
  • Services
  • Schedule
  • Commercial Construction
  • Residential Remodel
  • About
    • Our Story
    • Reviews
    • Community
  • Contact
  • Blog